bieap.gov.in Construction Technology Vocational Practical Question Bank : Andhra Pradesh State Institute of Education

Board : Andhra Pradesh State Institute of Vocational  Education
Course : Vocational Practical | Construction Technology
Document Type : Question Bank
Website : bieap.gov.in

Download Model/Sample Question Paper :
1st Year : https://www.pdfquestion.in/uploads/7333-ctyr1.pdf
2nd Year : https://www.pdfquestion.in/uploads/7333-ctyr2.pdf

Construction Technology Vocational Practical Question :

First Year
Subject : Construction Materials
Paper – I:

Related : Andhra Pradesh State Institute of Education Banking & Financial Services Vocational Practical Question Bank : www.pdfquestion.in/7331.html

Section – I 1 x 40 = 40 Marks:
1.Conduct water obsorption test on given brick sample and determine quality of bricks.
2. Determine the Crushing strength of given set of bricks.
3. Determine the Fineness of the given sample of cement by sieve analysis.
4. Determine the Normal consistency of cement sample.
5. Determine Initial Setting time of given sample of cement.
6. Determine the bulking of sand of the given sand sample.
7. Determine the dry density of soil by standard proctor test.
8. Determine the percentage of voids in coarse aggregate.
9. Determine the percentage of voids in fine aggregate.
10. Determine the fineness modulus of coarse aggregate by Sieve Analysis.
11. Determine the Fineness Modulus of Fine Aggregate by Sieve Analysis.
12. Determine the workability of concrete by Slump Cone test.
13. Cast the Concrete Cube in the given mould for determining Compressive Strength.
14. Determine Compressive Strength of given set of Concrete Cubes.

Section – II:
Record 5 Marks
Viva Voce 5 Marks

Subject : Construction Materials
Paper – I:
Section – I 1 x 40 = 40 Marks:
11. Cast the Concrete Cube in the given mould for determining Compressive Strength.

Section – II:
Record 5 Marks
Viva 5 Marks

Note : The serial numbers of the questions mentioned in are the serial numbers in question bank. In practical examination only the serial number of the questions will given, the examiner shall decode it with question bank and give the questions.

Subject : Construction Materials
Paper – I:
Section – I:
Aim, equipment and material required : 5 Marks
Procedure and Tabular formula : 10 Marks
Recording and Observations : 15 Marks
Calculations : 5 Marks
Result : 5 Marks

Section – II:
Viva : 5 Marks
Record : 5 Marks

Subject : Surveying Practice
Paper – II:
Section – I 1 x 40 = 40 Marks:
1. Determine area of the given field by the method of Chain Triangulation.
2. Determine area of the given field by conducting Cross-Staff Survey.
3. Find the bearings of given station points and calculate their included angles.
4. Conduct a Compass Survey along the closed traverse and plot the traverse.
5. Find the Reduced Levels of the given points using Levelling instrument. Take Bench Mark as 100.000m.
6. Find the Reduced Levels of the given points involving atleast one point lying above the line of collimation.
7. Determine the Horizontal Angle between the given points by Repetition method using Theodolite.
8. Determine the Horizontal Angle between the given points by Reiteration method using Theodolite.
9. Measure the Vertical Angle of a given point with respect to the instrument station and other given point by using Transit Theodolite.
10. Determine the Height of a given object by measuring Vertical Angle using Transit Theodolite.
11. Measure the Horizontal Angle and Distance between given Two Stations using Total Station.
12. Measure the area of a closed traverse using Total station.

Section – II:
Record 5 Marks
Viva Voce 5 Marks

Subject : Surveying Practice
Paper – II :
Time : 3 hours
Max. Marks : 50
Section – I : 1 x 40 = 40 Marks
10. Determine the Height of a given object by measuring Vertical Angle using Transit Theodolite.

Section – II :
Record 5 Marks
Viva Voce 5 Marks

Note :
The serial numbers of the questions mentioned in are the serial numbers in question bank. In practical examination only the serial number of the questions will given, the examiner shall decode it with question bank and give the questions.

Subject : Engineering Drawing
Paper – III :
Time : 3 Hours
Max. Marks : 50
Section – I : (10 Marks)
Section – A : (1 x 2 = 2 Marks
1. Print the following in Single Stroke Lettering of size 10mm:
2. Draw the Chain Dimensioning assuming suitable dimensions.
3. Draw the Parallel Dimensioning assuming suitable dimensions.
4. Draw the Combined Dimensioning assuming suitable dimensions.

Section – B : (1 x 2 = 2 Marks
5. What is an Isometric Projection?
6. What is the angle required with the horizontal to draw an Isometric View ?
7. Differentiate between Isometric View and Isometric Projection.

Section – C : (1 x 2 = 2 Marks
8. Draw the cross-section of a Singly Reinforced Simply Supported Beam of size 30cm x 60cm and four bars of 12mm dia (Not to Scale).
9. Draw the cross-section of a Lintel cum Sun shade. Assume dimensions.
10. Draw the Plan of a One Way Slab of span 3m and length 6m with reinforcement of 8mm bars at 15cm c/c.

Section – D : (1 x 2 = 2 Marks
11. List out the various Input devices.
12. List out the various Output devices.