X

bieap.gov.in Mechanical Engineering Technician Vocational Practical Question Bank : Andhra Pradesh State Institute of Education

Board : Andhra Pradesh State Institute of Vocational Education
Course : Vocational Practical | Mechanical Engineering Technician
Document Type : Question Bank
Website : bieap.gov.in

Download Model/Sample Question Paper :
1st Year : https://www.pdfquestion.in/uploads/7347-metyr1.pdf
2nd Year : https://www.pdfquestion.in/uploads/7347-metyr2.pdf

Mechanical Engineering Technician Vocational Practical Question :

First Year :
Subject : Workshop Practice
Paper – I:
Time : 3 Hours
Max. Marks : 50

Related : Andhra Pradesh State Institute of Education Fisheries Vocational Practical Question Bank : www.pdfquestion.in/7346.html

Section – I ( 1 x 40 = 40 Marks):
1. Prepare ‘T’ section with given material in fitting shop.
2. Prepare ‘L’ section with given plate in fitting shop.
3. Make a holes on given plate with given sizes.
4. Make a plain turning on given work piece by lathe machine.
5. Make step turning on given work piece by lathe.
6. Make Knurling on given work piece by lathe.
7. Threading on given work piece by lathe.
8. Make round bar from a Square bar.
9. Make a ring by a given round rod.
10. Make a S-hook from a given rod.
11. Make a rectangular tray by a given sheet metal.
12. Make a rectangular scoop by a given sheet metal.
13. Make a funnel by a given sheet metal.
14. Make a square butt joint with given work pieces by arc welding.
15. Make a ‘T’ joint with given two pieces by arc welding.
16. Make a Lap joint with a given work piece by arc welding.
17. Make a corner joint with given work pieces by arc welding.
18. Write a part programme for plain turning for given work piece by using C.N.C lathe.
19. Write a part programme for step turning for given work piece by using C.N.C lathe.
20. Write a part programme for threading for given work piece by using C.N.C lathe.

Section – II:
Record 5 Marks
Viva 5 Marks

Subject : Workshop Practice
Paper – I:
Time : 3 hours Max. Marks : 50
Section – I (1 x 40 = 40 Marks):
18. Write a part programme for plain turning for given work piece using C.N.C lathe.

Section – II:
Record 5 Marks
Viva 5 Marks

Subject : Workshop Practice
Paper – II:
Time : 3 hours Max. Marks : 50
Section – I ( 1 x 40 = 40 Marks):
(i) Aim / Requirements /Tools/Material / Apparatus 5 Marks
(ii) Diagram / Procedure / Job 10 Marks
(iii) Experiment /Observation / Performance 20 Marks
(iv) Result / Conclusion 5 Marks

Section – II:
Record 5 Marks
Viva 5 Marks

Subject : Engineering Drawing
Paper – II:
Time : 3 Hours Max. Marks : 50
Section – I 4 x 5 = 20 Marks:
1. What are the uses of set Square?
2. What is the use of ‘T’ Square?
3. Print the following matters in 10 mm size vertical lettering. “VOCATIONAL EDUCATION”
4. List out drawing Instruments.
5. Print the following title in simple vertical single stroke capital by free hand lettering of 10mm size. “MECHANICAL ENGINEERING TECHNICIAN”
6. Divide a line of 80mm into 8 equal parts?
7. Print the single stroke 10mm size vertical letter. “WORK IS WORSHIP”
8. Construct a regular heptagon of side 25mm semi circle method.
9. Divide a line 102mm long in to 7 equal parts.
10. Construct an ellipse by concentric circles method.
11. Construct a pentagon for the given side of 30mm.
12. Construct a parabolic curve with base as 80mm and axis 30mm- Tangent method.
13. Construct a hexagon in a circle of dia 60mm.
14. Draw the sectional view of a shaft dia 30mm.
15. Inscribe a hexagon for the given side of 40mm.
16. Draw the sectional view of a external thread of dia 20mm.
17. Construct an ellipse by concentric circles of dia 60mm.
18. Draw the sectional view of a bolt dia 15mm.
19. Draw the projections of a point which is 25mm under the HP and 35mm in front of VP.
20. What are the various commands of Autocad Screen.
21. Construct a parabola by a rectangular method by taking bases as 80mm and height as 50mm.
22. Draw the Conventional representation of metals, glass, and wood.
23. What is meant by Half sectional view?
24. Draw a rectangular hyperbola given a point at a distance of 20mm and 15mm from the Two asymptotes.
25. Draw in a free hand sketch of the following Tools.
(a) Hammer (b) Open ended Spanner

Section – II 4 x 5 = 20 Marks:
26. Draw the plan elevation and side view of the rectangular prism of base 30x20mm and height 40mm.
27. Draw the three views of the hexagonal prism of side 10mm and length 30mm.
28. Draw the plan, elevation and side view of a cylinder of diametric 20mm and length 30mm.
29. Draw the multi views of cone dia 60mm and height 80mm.
30. Draw the three views of the block shown in Ist angle projection. Fig Ist angle projection
31. Draw the three views of the block given in 3rd angle projection. Fig 3rd angle projection
32. Draw the three views of the block in 3rd angle projection. Fig 3rd angle projection
33. Draw the isometric views of V-Block given in figure. Fig V-Block
34. Draw the isometric views of stepped block in figure. Fig Stepped block
35. Draw the isometric view of rectangle of a side 30 mm length 60mm.
36. Draw the plan elevation and side views of the figure. Fig Elevation and side views

Tags: bieap.gov.in
Jency:
www.pdfquestion.in © 2022 Contact Us   Privacy Policy   Site Map