Board : Andhra Pradesh State Institute of Vocational Education
Course : Vocational Practical | Building Construction and Maintenance Technician
Document Type : Question Bank
Website : bieap.gov.in
Download Model/Sample Question Paper :
1st Year : https://www.pdfquestion.in/uploads/7329-bcyr1.pdf
2nd Year : https://www.pdfquestion.in/uploads/7329-bcyr2.pdf
Building Construction and Maintenance Technician Vocational Practical Question :
First Year :
Subject : Civil Engineering Lab
Paper – I:
Related : Andhra Pradesh State Institute of Education Crop Production & Management Vocational Practical Question Bank : www.pdfquestion.in/7335.html
Section – I :
1. Prepare standard solution of Na2 Co3. (Aim, Equipments, Procedure, Calculations and Result).
2. Determine the normality of Hydrochlore acid present in given solution. (Aim, Equipments, Procedure, Calculations and Results)
3. Determine the Hardness of a given sample of water. (Aim, Equipments ,Procedure , Calculation and Results)
4. Determine the concentration of free chlorine available in water. (Aim, Equipments ,Procedure , Calculation and Results)
5. Determine of PH of a given sample . (Aim, Equipments ,Procedure , Calculation and Results)
6. Determine the conductivity of a given sample (Aim, Equipments,Procedure, Calculation and Results)
7. Determine the Dissolved Oxygen content in the given sample. (Aim, Equipments ,Procedure , Calculation and Results)
8. Determine the total solids present in the water sample. (Aim, Equipments,Procedure , Calculation and Results)
9. Determine the concentration of total solids in a given water sample (Aim, Equipments ,Procedure , Calculation and Results).
10. Determine the chemical oxygen demand of a given sample (Aim, Equipments ,Procedure , Calculation and Results).
11. Connecting given length of pipe line using coupling, T-ee and Union. (Aim, Equipments ,Procedure , Calculation and Results).
12. Perform connection for a given length of pipe using following specials reducer, Elbow. (Aim, Equipments ,Procedure , Calculation and Results).
13. Perform the cutting and threading of a given G.I pipe / PVC / with diset. (Aim, Equipments ,Procedure , Calculation and Results).
14. Prepare pipe line in Bath Room with joints and turns. (Aim, Equipments,Procedure , Calculation and Results).
15. Find out leakages in water supply connections and their Repairing. (Aim, Equipments ,Procedure , Calculation and Results).
16. Assemble the Hand pump connections. (Aim, Equipments, Procedure, Calculation and Results).
17. Assemble the connections of electric Heaters in building. (Aim, Equipments,Procedure , Calculation and Results)
18. Prepare half lap joint of the given wooden piece. (Aim, Equipments ,Procedure, Calculation and Results).
19. Prepare Dovetail joint of the given wooden piece. (Aim, Equipments ,Procedure, Calculation and Results).
20. Prepare Tenon joint of with given wooden. (Aim, Equipments ,Procedure, Calculation and Results).
21. Perform the connection of one lamp controlled by a single switch. (Aim, Equipments ,Procedure , Calculation and Results).
22. Make L shape job by using M.S.Flate. (Aim, Equipments ,Procedure , Calculation and Results).
23. Make the connection of stair case wiring. (Aim, Equipments ,Procedure, Calculation and Results).
24. To prepare earthing in house wiring. (Aim, Equipments ,Procedure , Calculation and Results).
25. To conduct tension test on the given steel specimen. (Aim, Equipments, Procedure , Calculation and Results).
26. To perform torsion test on mild steel specimen for finding out the modulus of rigidity. (Aim, Equipments ,Procedure , Calculation and Results).
27. To Determine the characteristics compressive strength of given wooden piece. (Aim, Equipments ,Procedure , Calculation and Results).
Subject : Surveying Practice
Paper – II:
Section – I :
1. Determine area of the given field by the method of Chain Triangulation.
2. Determine area of the given field by conducting Cross-Staff Survey.
3. Find the bearings of given station points and calculate their included angles.
4. Conduct a Compass Survey along the closed traverse and plot the traverse.
5. Find the Reduced Levels of the given points using Levelling instrument. Take Bench Mark as 100.000m.
6. Find the Reduced Levels of the given points involving atleast one point lying above the line of collimation.
7. Determine the Horizontal Angle between the given points by Repetition method using Theodolite.
8. Determine the Horizontal Angle between the given points by Reiteration method using Theodolite.
9. Measure the Vertical Angle of a given point with respect to the instrument station and other given point by using Transit Theodolite.
10. Determine the Height of a given object by measuring Vertical Angle using Transit Theodolite.
11. Measure the Horizontal Angle and Distance between given Two Stations using Total Station.
12. Measure the area of a closed traverse using Total station.
Subject : Engineering Drawing
Paper – III:
Section I :
1. Choose one question from the following:
(a) What are the recommended size of letters and numbers.
(b) State the object of drawings.
(c) Print the following in single stroke lettering of given size 12mm.
(d) Mention the system of dimensioning.
(e) State the aligned system of dimensioning.
2. Choose one Question from the following:
(a) Draw an Isometric scale.
(b) What is an Isometric projection
(c) Draw an Isometric projection of a rectangle.
(d) State the difference between isometric view and isometric projection.
3. Choose one question from the following:
(a) Where do you keep object in first angle projection
(b) Draw a Projection of point “A” above HP and in front of VP.
(c) Where do you keep the object in third angle protection.
(d) What is the meaning of orthographic projection.
(e) Draw a projection of line length 70 mm parallel to both H.P and V.P.
4. Choose one question from the following:
(a) Identify and list of various input device.
(b) Identify and list of various output device.
(c) Write different window accessories.
(d) Write any four uses of computer.
(e) Write the components of computer.
5. Choose one question from the following:
(a) Define Hardware and Software
(b) What is an Icon.
(c) How do you create new document in MS Word.
(d) What are the various types of storage devices.
Section II :
6. Inscribe a regular pentagon in given circle of a radius 50 mm.
7. Inscribe a regular heptagon in given circle of radius 60 mm.
8. Inscribe a regular hexagon in a given circle of radius 30 mm.
9. Construct an Ellipse by concentric circles method major axis as 120 mm and minor axis 60 mm.
10. Draw a parabola hyperbola through and axis height of 60 mm by rectangular method.
11. Draw a rectangular hyperbola through a point “Q” which is at distance 40mm from “OY” and 60mm from “OX”.
12. Draw a projections of following points on same ground:
(a) is 40 mm above HP and 25 mm in front of VP.
(b) “B” is in the HP and 20 mm in front of VP.
13. Draw a projection of the following points on same ground:
(a) “A” is 30 mm below of HP and 25 MM behind the VP.
(b) “B” is 40 mm below the HP and 20 mm in front of VP.
14. A line PQ 80mm long is in the HP and make an angle 45, with the VP. Its end 25mm behind VP. Draw projections.
15. A line PQ 75mm long is parallel to both HP and VP and 30mm above HP and 20 mm in front of VP.