Board / Organisation : Directorate General of Civil Aviation
Exam Name : Aircraft Maintenance Engineers AME Licence Examination
Document Type : Sample Questions
Website : dgca.nic.in
Download Model/Sample Question Papers: https://www.pdfquestion.in/uploads/7271-SampleQues_AME.pdf
Questions Aircraft Maintenance Engineers Licence Exam Paper :
Paper -1( Aircraft Rules & Regulations):
1. “Temporary Aerodrome” means an aerodrome intended to be used for:
1. a period not exceeding three months
2. a period not exceeding six months
3. a period as specified by DGCA
4. a period as specified by Airports Authority of India
Ans: 2
Related / Similar Question Paper : RSGB Foundation Amateur Radio Question Paper
2. Temporary certificate of Registration is issued:
1. For importing an aircraft by air
2. As in (1) and it is valid only Upto the period approved by the country of export
3. When lease period of aircraft lapsed
4. As in (1) and shall be valid only until the first landing of the aircraft at a custom aerodrome in India
Ans: 4
3. Which of the following defines human factors?:
1. It is the study of how people interact with their environment
2. These are elements that affect our behavior and performance, especially those that may cause us to make errors
3. It is concerned with optimizing performance including reducing errors so that the highest level of safety is achieved and maintained
4. All the above
Ans: 4
4. DGCA may permit import of unpressurised aircraft of more than 20 years of age for the purpose of flying training operations, subject to the condition:
1. The aircraft will be imported with new or overhauled components including engines
2. The aircraft will has been operated less than 20,000 hours prior to import
3. The aircraft will have a valid certificate of Airworthiness and all components of the aircraft will be within their stipulated overhaul life
4. All the above are correct
Ans: 3
5. Mark the correct statement related to CAR -21:
1. It prescribe procedural requirements for issue of type certificate issue of C of A, issue of noise certificate and issue of Export C of A
2. It covers matters related to design, manufacture and all other issues related to Airworthiness including continued airworthiness, repairs etc
3. It contains requirements for approval of design and production organisation as per the provision of Aircraft Rule 133B
4 All the above are correct
Ans: 4
6. Mark the correct statement related to classification of Group for supplemental type certificate (STC) cases under CAR 21:
1. Conversion to tail wheel configuration is the kind of STC which comes under group 1
2. Fairings, nacelle, landing Gear the kind of STC which comes under group 2
3. Gap seals, aileron, flap, empennage, doors are the kind of STC which come under group 2
4. All the above are correct
Ans: 4
7. Under CAR 145, the Accountable Manager of the organization shall appoint:
1. Maintenance Manager
2. Certifying Staff
3. Person with responsibility for monitoring the quality system
4. All the above are correct
Ans: 3
8. An application for the issue or variation of an approval under CAR -145, shall be made to DGCA in a form prescribed is :
1. CA Form 1
2. CA Form 2
3. CA Form 3
4. CA Form 4
Ans: 2
9. Approval procedure for continuous Airworthiness Management Organization covered in:
1. CAR M, Sub Part ‘G’
2. CAR M, Sub Part ‘I’
3. CAR 21, Sub Part ‘G’
4. CAR Section 2 Series ‘E’
Ans: 1
10. The maintenance of the aircraft is required to be performed in accordance with the approved Maintenance Programme. Who is accountable for such activity?:
1. The owner of the aircraft
2. The Lessee in case of leased aircraft and detailed in the Leasing contract
3. The owner / operator of the aircraft
4. All the above
Ans: 4
Paper – 2 ( General Engineering & Maintenance Practices):
11. A cylindrical wire, 1 m in length has a resistance of 100 ohms. What would be the resistance of the wire made from same material if both the length and the cross sectional area are doubled :
1. 200 ohms
2. 400 ohms
3. 100 ohms
4. 50 ohms
Ans: 3
12. What type of flap system increases the wing area and changes the wing camber:
1. Fowler Flap
2. Slotted Flap
3. Split Flap
4. Plain Flap
Ans: 1
13. Aircraft bolts with a asterisk marked on the bolt head are –
1. Made of aluminum alloy
2. Close tolerance bolts
3. AN Standard steel bolts
4. Low strength material bolts
Ans: 3
14. The process of adding impurities to a pure semiconductor is called:
1. Mixing
2. Doping
3. Defusing
4. Refining
Ans: 2
15. The unit of Electric Intensity is:
1. Joule/Coulomb
2. Newton/Coulomb
3. Volt/metre
4. Both (2) and (3) are correct
Ans: 4
16. Fretting corrosion is most likely to occur:
1. When two surfaces fit together but can move relative to one another
2. Only when two dissimilar metals are in contact
3. When two surfaces fit loosely together and can move relative to one another
4. All the above are correct
Ans: 1
17. Which tool is used to find the center of a shaft or other cylindrical work :
1. Combination set
2. Dial indicator
3. Micrometer caliper
4. All are correct
Ans: 1