Organisation : CCS Haryana Agricultural University
Course : M.Tech Programme
Document Type : Old Question Paper
Website : http://admissions.hau.ac.in/
HAU M.Tech Question Paper
CCS Haryana Agricultural University, M.Tech 6 Years Programme Old Question Paper
Related / Similar Question Paper : HAU M.Sc. Agriculture Question Paper
M.Tech Old Question Paper
1. Manual chaff cutter, according to BIS standards, feeding chute has minimum length of –———— and covered length of —————.
(A) 90 cm and 45 cm
(B) 60 cm and 30 cm
(C) 45 cm and 30 cm
(D) None of these
2. S.F.C in engines stands for
(A) Sensor fuel calibration
(B) Speed fuel calibration
(C) Specific fuel consumption
(D) Specific fuel consumption
3.Ports are present in
(A) 4- stroke engine
(B) 2- stroke engine
(C) Both (A) and (B)
(D) None of these
4. In air cooled engine, the purpose of fins is to
(A) Cool engine
(B) Increase the contact area of air
(C) Control fuel consumption
(D) Both (A) & (B)
5. Standard PTO speed is
(A) 1000 rpm
(B) 1100 rpm
(C) 540 rpm
(D) 340 rpm
6. The type of pump, used in force feed system of lubrication is
(A) Gear pump
(B) Jet pump
(C) Plunger pump
(D) Reciprocating pump
7. In 4-stroke cycle engine, one cycle is completed in
(A) one revolution of the crankshaft
(B) two revolution of the crankshaft
(C) four revolution of the crankshaft stroke
(D) None of these
8. A four cylinder diesel engine has a cylinder 30 cm diameter, 60 cm Stroke and runs at 160 revolutions per minute. If the engine fires once per two revolution and shows an indicated mean effective pressure of 7.5 kg per square cm, calculate I.H.P?
(A) 144 hp
(B) 288
(C) 240 hp
(D) None of these
9. The process of detaching the grains from the ear head or the plants is called
(A) Mowing
(B) Winnowing
(C) Cutting
(D) None of these
10. In mower, the ledger plate is the component of
(A) Power transmission unit
(B) Knife section
(C) Guard
(D) None of these
11. The pressure of knapsack sprayer during operation is
(A) 1.5 kg/cm2
(B) 3.5 kg/cm2
(C) 1.0 kg/cm2
(D) 5.0 kg/cm2
12. What is the difference between planter and seed drill?
(A) Row to row distance is same.
(B) Plant to plant distance is same.
(C) Both (A) and (B)
(D) None of these
13. How many hectares of grass per day of 10 h can be cut by a mower being operated at a speed of 4 kmph and with 40 cm cutter bar?
(A) 16.8
(B) 12.8
(C) 13.8
(D) 14.8
14. A coulter attachment is used with
(A) Disc harrow
(B) Seed drill
(C) Subsoiler
(D) Mb Plough
15. In combine, the commonly used cylinder is
(A) Drum type
(B) Spike tooth type
(C) Rasp bar type
(D) None of these
16. The length of chaff cut for silage varies from
(A) 5 cm
(B) 6 cm
(C) 2 to 4 cm
(D) 8 cm
17. VMD term is associated with
(A) Sowing
(B) Intercultural
(C) Harvesting
(D) Spraying
18. Determine the length of cross belt to connect two pulleys 4 m apart. The diameter of driving and driven pulley is 1.25 m and 0.75 m, respectively?
(A) 11.39 m
(B) 10.39 m
(C) 9.39 m
(D) 12.39 m
Download Question Paper
M.Tech Question Paper : https://www.pdfquestion.in/uploads/pdf2020/37083-mtech.pdf