www.pdfquestion.in

Name of the College : Noorul Islam College of Engineering
University : Anna University
Degree : B.E
Department : Aeronautical Engineering
Subject Code/Name : AE 1402 – Composite Materials & Structures
Year : 4th
Semester : 7th
Document Type : Question Bank
Website : niceindia.com

Download Model/Sample Question Paper :https://www.pdfquestion.in/uploads/niceindia.com/3059-AE1402_COMPOSITE_MATERIALS_AND_STRUCTURES.pdf

NICE Composite Materials & Structures Question Paper

Part-A :
Unit-1 :

Related : Noorul Islam College of Engineering GE1301 Professional Ethics & Human Values B.E Question Bank : www.pdfquestion.in/3076.html

1. What are the major constituents in composite materials? :
Reinforcing phase
One in which it is embedded is called the matrix.
Reinforcing phase – Fibres, particles or flakes.
Matrix- Materials are generally continuous.

2. Define lamina. :
A lamina (also called a ply or layer) is a single flat layer of unidirectional fibers or woven fibers arranged is a matrix.

3. Define laminate. :
A laminate is a stack of plies of composites. Each layer can be laid at various orientations and can be different material systems.

4. Define Hooke’s law. :
Within elastic stress is proportional to strain. (e.g) Spring balance.

6. What are advanced composites? :
Advanced composites are composite materials which are traditionally used in the aerospace industries. These composites have high performance reinforcements of a thin dia. in a matrix material such as epoxy and aiuminium.

7. List down the reinforcement materials and resins used in composite materials. :
Reinforcement materials
Graphite, Glass, Aramid, Kevlar 49, Boron
Resins
Epoxy, aluminium, Polyamide, Nylon, Polyesters, Vinyl esters, Phenolics,
Polymides, Polybenzimidazoles, Polyphenylquinoxaline.

8. Why are fiber reinforcements of a thin diameter? :
(i) As the fibers become smaller in diameter , it reduces the chances of an inherent flaw in the material.
(ii) Fixed fiber volume in a given volume of composite, the area of the fibermatrix interface is inversely proportional to the diameter of the fiber.
(iii) Ability to bend increases with a decrease in the fiber diameter and is measured as flexibility.

9. What are the aircraft structural components made of composite materials?
Elevator face sheets, Horizontal stabilizer, Wing spoilers, ailerons, rudders, elevators, fairings etc., Skin on the horizontal stabilizer box, Under wing fairings, fin, rudder and stabilizer skins, skins on vertical fin box, fin leading edge, wing skins, horizontal and vertical tail boxes ; wing and tail control surfaces etc., Wing skins and sub structure; forward fuselage; horizontal stabilizer flaps; ailerons.

10. Explain the difference between isotropic and anisotropic materials. :
Anisotropic materials are the opposite of isotropic materials like steel and aluminium. Anisotropic materials have different properties in different directions. For example, the Young’s modulus of a piece of wood is higher (different) in the direction of the grain than in the direction perpendicular to the grain. In comparison, a piece of steel has the same young’s modulus in all directions.

11. What are the material constants of an orthotropic materials? :
For an orthotropic material, the nine independent elastic constants are E11,E22, E33, G12, G13, G23, n 12, n 13, n 22. Uni-directionally oriented fiber composites are a special class of orthotropic materials. If the fibers are in the 1-2 plane, elastic properties are equal in the 2-3 directions so that E22=E33, n 12=n 13 and G12=G13. Further more G23 can be expressed in terms of E22 and n 12. Thus the number ofindependent elastic constants for a unidirectionally oriented fiber composite reduces to 5. Such composites are often called transversely isotropic.

12. What are the properties of matrices? Write down its usage :
Properties :
Low viscosity.
High melting point.
Low curing temperature.

Usage :
To transfer stresses between the fibers.
To provide a barrier against an adverse environment.
To protect the surface of the fibers from mechanical abrasion.

13. Define (a) Orthotropic material (b) isotropic material and give the number of elastic constants in macro mechanics :
If a material has three mutually perpendicular planes of material symmetry it is called orthotropic material. Three mutually perpendicular planes ofmaterial symmetry also imply that there are three mutually perpendicular planes of material symmetry. Note there are nine independent elastic constants.

If all planes in an orthotropic body are identical, it is an isotropic material. :
This also implies that there are infinite principal directions. Note that there are two independent constants.

14. What is meant by orthogonally isotropic material? : Give an example.:
The Q16 qnd Q26 terms are non-zero when i has any value other than 0º or 90º. This indicates the anisotropic behaviour of an orthotropic lamina when its fibers are not oriented along or perpendicular to the reference load direction. The terms Q16 and Q26 are that cause an orthotropic lamina to behave like an anisotropic lamina in a laminate, when i is neither 0º nor 90º.(Better 30º and 60º).

15. Define composite materials. :
A composite is a structural material which consists of combining two or more constituents. The constituents are combined at a macroscopic level and are not soluble in each other. One constituent is called the reinforcing phase and the one in which it is embedded is called the matrix.